Van Engelen Service
Specialist in Lamination machines
The KS-520 is a very compact and robust piece of equipment, no usage of dangerous chemicals, can be easily integrated within your manufacturing environment.
Speed: 30mtrs per minute maximum
Sheet size min: 22 cm x 22 cm
Sheet size max: 52 cm x 72 cm
Paper weight: 115 – 350 gsm
Film thickness useable: From 18 my to 30 my
Types film: BOPP
Feeding: Up & down pile facilities
Feeder: Type Offset Feed automatic.
Vacuum pump: Yes
Maximum loading pile height: 625 mm
Gates: Yes (precise overlapping +/- 1mm)
Sheet misfeed sensor: Yes
Chromed callender roller: Dual zone electrically heated
Perforating wheel : Yes
Slitter : Yes
Max temperature: 140Â°C
Pressure: Counter pressure roller pneumatically activated
Spreader roller: Yes
Decurling bar: Yes
Touch Screen Panel: Yes
Max linear Nip Pressure: 43N/mm
Separator: Fully automatic including an Abrasive wheel and a fully integrated snapper
Abrasive wheel: Fully adjustable
Snapper: Full roller
Sheet blower: Yes
Delivery table: Yes
Floor space ( L*B*H) : 2.60m Ã— 1.23m Ã— 1.56m
Voltage 380/400/415 V AC, 50 Hz ,7,3 kVA 3 phases plus earth and neutral with a circuit breaker Connection: CEE 17 Amp 5 pin power socket
Pressure: Mini 6 bars
Volume: 130 litres per minute, 10 -15 cfm air sec, air volume must be constant.
Incoming air: 10mm diameter pipe
Compressor: supplied by the customer.
Copyright © 2017 Van Engelen Service. All rights served.
Design by Supato Design.